StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Speed management proposal - Essay Example

Cite this document
Summary
Safety and mobility that are traits of performance of transport were indicated via speed both directly and indirectly. For shippers, motorists and the industry for commercial transport, it is not desirable to have the machines operating at high speeds. Speeds that are higher translate to travel times that are lower and thus an indication that mobility is good. Moreover, complexity and lack of clarity exist between safety and speed. …
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER94.2% of users find it useful
Speed management proposal
Read Text Preview

Extract of sample "Speed management proposal"

SPEED MANAGEMENT PROPOSAL By Introduction Safety and mobility that are traits of performance of transport were indicated via speed both directly and indirectly. For shippers, motorists and the industry for commercial transport, it is not desirable to have the machines operating at high speeds. Speeds that are higher translate to travel times that are lower and thus an indication that mobility is good. Moreover, complexity and lack of clarity exist between safety and speed. Probability of speed effects still has very few consensus points. Highways of high speed are a factor that is complicated since crashes involved are very small. However, such highways also have design features that can be distinguished but it is still difficult to separate other traits from the speed effects. A general agreement that exists is that injuries on the roads increase because of speed and so objectives of safety and mobility can be conflicting. Globally, over speeding is one hell of a predicament to control in our roadways and is an immense contributor to most of the accidents witnessed both in rural and urban areas by traffic officials and residents. It is a belief by many individuals that eradication of speeding will save people’s lives by driving at a speed that is appropriate (Ioainnoou, 1997, pg 216). A road accident is considered related to over speeding if the driver is charged with an offense of over speeding. Additionally, if a traffic officer who is on the location indicates that the driver at some point was over speeding past the required speed limit when the accident occurred then it became over speeding-related. Road accidents related to over speeding have led to many deaths worldwide and, as a result, the community, and insurance firms have incurred excessive costs. Accidents or crash are more likely to happen the faster a driver drives and the higher the risk of getting injuries that are brutal and even loss of life. Accidents and speed relate to another due to a number of dependent factors. For instance, how severe the injury of the occupants of the vehicle involved in a crash is not only determined by the speed that resulted in the collision but also the difference in mass of the two involved vehicles. Speed has a more important part in cases that are more intricate like it happens on urban roads as compared to motorway routes that are less complex. In either situation, the effect of the measures of over speeding is examined by absolute speed of driving, types of roads and the differences of speed of the involved vehicles. Management of speed includes enforcement, engineering and education to the public to help in eradicating accidents on roads that relate to over speeding of vehicles. Actually, this would help uphold the movement of road users in an orderly manner. Time of engineers of traffic and energy is consumed in building residential streets and local roads, and thus few traffic accidents are always experienced in such areas. This paper discusses enforcement of the law by traffic officers, engineers of traffic and the public to the concept of tranquilizing the traffic that may aid in eliminating over speeding among drivers (Chen, 2008, pg 115). Calming of traffic is the use of controls that are physical and public support to reduce the adverse effects of caused by motor users, change behaviors of drivers and safeguard the pedestrians. Aims and Objectives Objectives of calming of traffic include reduction of speed in motor vehicles, crash frequency, and severity reduction. Additionally, increasing safety to pedestrians and installation of road safety measures to reduce the need for enforcement of laws by traffic police officers are part of traffic calming goals. Hypothesis Speed management as a measure to a reduction of road crashes Speed management not as a means of a decrease in road crashes Literature Review The principle objective of speed management is to increase is to reduce fatal accidents thereby increasing safety on the roads. It entails planning and designing the layout of a road in a manner that appropriate required speed can be attained. This paper seeks to understand the role of speed management in our roads and how it helps eradicate most of the witnessed crashes. It also examines the measures that would assist in safeguarding the users and non-users of highways. The paper also looks at the effects of speed and how severe the vehicle occupants can be brutally injured as a result of the speed of the vehicle. It reviews practices for locating and implementing limits of speed on all road types and providing guidance to drivers and other road users with alternative strategies for setting speed limits. It aims at strategies put forward improving understanding and recognition of the road users and non-users of the risks that can be encountered on different road types and the limits of speed that should be applied. Explanation on road safety, which ensures improved quality of individuals’ lives and balances that, is better between road securities, objectives of the environment accessibility by everyone. Additionally, high rate of reduction in the number of collisions of road traffic, injuries and deaths in which over speeding is a factor that contributes to the mentioned hazards. Transport research laboratory has verification on the effects of speed on collisions and crashes. Research on individual drivers indicates that when driving at a velocity of more than the average of 25% then a driver is in a more risky position to cause a crash. It is also observed that he can cause a crash six times more than a driver operating at a required average speed. Those who drink and drive are also more associated to road accidents. Further study proves that the number of collisions and crashes increases on every road type with an average speed that increases. The effect of speeding differs on different kinds of roads and is most experienced on roads that are slowest. Confirmed data shows that if the average speed reduces by 1mph then accidents are reduced by 5%. As per Napier University research, data indicates that people are aware that the speed limit they adopt while driving in the absence of any observation from traffic officers is always not safe to them. Methodology Work in the field was conducted along the roads in the U.K. Some of the roads were single carriage while some were dual carriageway with two lanes each running in the opposite direction. The location of measurement was set along the direction of East to West. The main methods that were identified for use in the collection of data were four. Such methods included mirror, radar meter, method of using radio and GPS observers in vehicles that are moving and use of spot speed. The four methods were initiated in two different phases. The data that is considered raw was adequately scrutinized by categorizing vehicles in the road into two distinctive groups such as light and heavy. The four methods of data collection are discussed below. Mirror The method of mirror is founded on the optical theory. Two mirrors were used during the observation period. The two mirrors were placed on a raised road site to make it easier for the mirrors to capture any reflection on the road. Additionally, there were also two tapes that were marked by the barrier considered to be central whose roles were to reflect the beginning and the end point of the sections that were measured. Such reflection could be observed on the mirror. Approximately a length of 40 meters was determined for the distance of traveling. Stopwatch was used in recording data as the vehicles were seen passing the beginning and the end points of the measured sections. Radar Meter Radar, introduced in the radar gun theory, has the effect of Doppler in which the frequency difference of a microwave can be measured. It enhances the precise achievement of the speed of an individual’s vehicle. During the session of surveillance, it was essential to have two observers to perform different roles (Raghavan, 2003, pg 121). The first observers role would be to read and record the vehicles’ speed passing on the road as observer two’s role would be to record the speed of both the heavy and light vehicles. Spot Speed Spot speed that is computed at a particular point on the road is known as spot speed. Measurement of spot speed can be used to obtain a sampled vehicle’s speed passing a particular highway or street at a given time (Hoyle, 1995, pg 101). There were marked spots on the road covering a distance of about 50 meters. A stopwatch was used to observe the vehicles speed as it passed over the marked lines of the beginning and the terminal points. Radio This measurement was efficiently conducted by two students in which the measurement distance was of a length of 100 meters. The two students were located at different points in which one was based at the starting point of the motor vehicle while the other was based on the end point of the mark. The student at the end point measured the speed of the vehicles using a stopwatch and recorded the data too. The two students communicated through the radios as the student at the starting point informed the one at the endpoint that the vehicle had already taken off for data to be taken appropriately. Work program The work program of the research was to identify issues of speeding and the causes of speed in roads and what can aid in speed management so as to protect lives. Students formed a team of speed management to observe the problem of speed and cover the speed management in different areas. Their goal was to use and come up with the most efficient measurement methods that can help avert crashes that cause severe injuries and result in loss of life. The study also sought to evaluate the efficacy of an approach that is wide-ranging to the problem of management of speed. The work program entailed collection of data posted speed limit assessment and to determine whether excessive speeds are the only causes of crashes. Crashes that were available were also reviewed, and data of roadway collected to pin down the factors that are associated with the causes of accidents on roads. Other speed management stakeholders were also consulted to learn more about management of speed in an efficient manner. The data was collected from accident records, concerned citizens and conditions of the roads in which there were frequent accidents. The team identified affected areas where frequent crashes were witnessed, and a thorough research was carried out on the causes of the crashes. The team also assessed the speed limits of vehicles and had the interest to check if the motorists voluntarily complied with the set speed limits. The team also had to verify if speed applied is more excessive than the set speed limits that are about a speed of about 85th percentile in which drivers are classified as prudent and reasonable. The team also identified roads that are unpaved and carried a research study whether there were frequent crashes witnessed in such routes. The discovery was that since such roads lack clear zones and areas for runoff then there should be a different set speed limit to minimize the rate of accidents. The whole program took a week to be accomplished as all the four mentioned speed factors had each of them being observed in a day. Data analysis Methods A sample of 30 vehicles was taken from both the light and heavy vehicles, and standard deviation of their speed calculated. Since setting limit of speed is a safety measure on roads, it is significant to know the impacts of speed on safety of road users. The severity of a crash is directly linked to the speed of a vehicle though there is a contradiction on the speed impact on the occurrence of the crash. The calculation of the standard deviation was done, and the measurement distribution of all the methods put into the record. On the other hand, there was a comparison between the four methods of measurements of the vehicles’ speed and normal distribution was also achieved. Moreover, after the field work, an analysis is carried out and irrelevant and complex data is disposed off. Theory of statistics was of relevance in the accurate analysis of the collected data as this helped in the description of the data more accurately. Further, for smooth and precise work, SPSS software and Excel were the most relevant in the compilation of data to avoid all the unnecessary errors. The data collected from the methods used in the field were tabled and used to plot curves of cumulative frequency. The curves were then used to obtain the mean, modal and median speeds of the sampled vehicles. The curves were also used in the computation of the standard deviation of the distribution of speed of the vehicles. Results Determination of the sample size by obtaining all the data collected in the field relied on a particular measure methods. For instance, when measuring the speeds of light vehicles, it was appropriate to use radio and mirrors to obtain the most accurate data. Time wasting while measuring the speed of the vehicles was avoided, just the most necessary data that was collected which represented the allocation features were taken into consideration. As a result, this aided in the analysis of the speed of the data. The standard deviation of the traffic engineering is always set at 5mph. Measurement of spot speed was used in the calculation of Time Mean Speed (TMS) whereby TMS was achieved by using the mirror and radar methods of measurements. Collection of the spot speed of vehicles is much aided by the radar gun as it is considered fastest and most convenient. The speed of the vehicles’ was determined while directly observing their speed. Moreover, the speed of the vehicles was also influenced ones the drivers learned that their speed was being monitored. The observed errors also resulted due to the site of the observer who could have been due to being placed in the opposite direction of the vehicle under observation. It was also discovered that radio and mirror measurement methods had errors that were generated from the end-point determination, the delays in the readings and lack of proper and efficient communication between the observers. The errors, however, were avoided via proper use of the mirrors that apply the theory of reflection in optics as they improved the visibility of the start and ends of the vehicles. Conclusion In this research, the principle objective is on examining the traits of each measurement method that was used on the site and the observed speed data scrutiny. It also aims at providing the most efficient method of calming of traffic. Calming devices of transportation that include bumps and speed humps, street closures, rumble strips and diverters of traffic among others are some of the most efficient methods of curbing the speed that might result in a crash. Moreover, brutal injury and unnecessary deaths are curbed. On the other hand, the most considered approach to be above board in speed measurement when comparing with the rest of the methods is radar. Nonetheless, when radar method is compared with mirror and radio methods of analysis, then it is found that external factors of the environment can be an uphill to avoid. As a result, the speed that is not expected is determined in the processing of data. Unexpected speeds can also result due to mechanical problems that include failure of the brakes. Statistics should properly be applied to the handling of data to provide the most correct and required analysis of the speed management. For proper speed management, residents and local officials must work together with the objective of safety improvement on streets of residents and also on road and non-road users. Safety alternatives that would help improve road safety through programs of calming of traffic should be fully explored. More of public education should be conducted to inform road users of the devices of traffic calming. The education can be done by the installation of adequate signs with warning directives markings by the roadside that are permanent. Other research studies also indicate that speed management can be well conducted by providing capacity that is adequate on the main streets. Though it is a costly method to use, it finally helps reduce the number of complaints in residential streets, as well as the improved safety of road users. References Organisation For Economic Co-Operation And Development, European Conference of Ministers Of , & Oecd/Ecmt Transport Research Centre. (2006). Speed management. SourceOECD. Paris, ~OECD. Parham, A. H., & Fitzpatrick, K. (1998). Handbook of speed management techniques. College Station, Texas Transportation Institute, Texas A & M University System. Parham, A. H., & Fitzpatrick, K. (1999). Investigating speed management techniques. College Station, Texas Transportation Institute, Texas A & M University System. Kung, H. T. (1997). Traffic management for high-speed networks. Washington, D.C., National Academy Press. Herrstedt, L., & Kjemtrup, K. (1992). Speed management and traffic calming in urban areas in europe: a historical view. Organisation For Economic Co-Operation And Development. (2013). Cycling, Health and Safety. Paris, Oecd Publishing. Dalgleish, M. (2008). Highway traffic monitoring and data quality. Boston, Artech House. Herrstedt, L. (1992). Traffic calming design - a speed management method: Danish experiences on environmentally adapted through roads Chen, Y. (2008). A highway work zone design and traffic management decision system. Thesis (Ph.D.)-- University of Wisconsin--Madison, 2008. National Academies (U.S.). (2010). Achieving traffic safety goals in the United States: lessons from other nations. Washington, D.C., Transportation Research Board. Fitzpatrick, K. (2003). Design speed, operating speed, and posted speed practices. Washington, D.C., Transportation Research Board. http://trb.org/publications/nchrp/nchrp%5Frpt%5F504.pdf. Wilson, E. M. (2003). Roadway safety tools for local agencies: a synthesis of highway practice. Washington, D.C., Transportation Research Board (Business Office, 500 5th St., Washington D.C. 20001). Garber, N. J., & Hoel, L. A. (2008). Traffic and highway engineering. London, Cengage Learning. Wooldridge, M. D. (2003). Geometric design consistency on high-speed rural two-lane roadways. Washington, D.C., Transportation Research Board. NATIONAL RESEARCH Council (É.-U.). (1997). Determination of stopping sight distances. Washington, D.C., National Academy Press. International Conference On Transportation Engineering, & Peng, Q. (2009). International Conference on Transportation Engineering, 2009: proceedings of the Second International Conference, July 25-27, 2009, Southwest Jiaotong University, Chengdu, China. Reston, Va, Society of Civil Engineers. Great Britain. (2007). Traffic calming. London, TSO Ewing, R. H., & Brown, S. J. (2009). U.S. traffic calming manual. Chicago, Ill, American Planning Association. Citizens against Route Twenty. (1989). The Solution to Route 20 and a new vision for Brisbane. Ashgrove, Qld, CART. Hoyle, C. L. (1995). Traffic calming. Chicago, IL (1313 60th St., Chicago 60637), American Planning Association, Planning Advisory Service Ewing, R. H. (1999). Traffic calming: state of the practice. Washington, DC, Institute of Transportation Engineers. International City/County Management Association. (2000). City of Champaign traffic calming policy. Washington, D.C., Management Information Publications, ICMA. Hass-Klau, C. (1992). Civilised Streets: a guide to traffic calming. Transportation Association Of Canada, & Canadian Institution Of Transportation Engineers. (1998). Canadian guide to neighbourhood traffic calming. Ottawa, Transportation Association of Canada. Saffel, A. J. (1998). Effective traffic calming applications and implementation: final report. St. Paul, Minn, Minnesota Dept. of Transportation, Office of Research Administration. Hawley, L. (1993). Towards traffic calming: a practitioners manual of implemented local area traffic management and blackout devices. [Canberra, ACT], Federal Office of Road Safety. Raghavan, S. (2003). Radar meteorology. Dordrecht, Kluwer academic publ. Astanin, L. I., & Kostylev, A. A. (1997). Ultrawideband radar measurements analysis and processing. London, Institution of Electrical Engineers. United States Navy, & USN. (2007). North American FJ-3 Fury Pilots flight operating instructions: flight handbook : Navy models FJ-3, FJ-3M aircraft. Los Angeles, Periscope Film LLC. National Research Council (É.-U.), Commercial Truck And Bus Safety Synthesis Program, & États- Unis. (2003). Highway/heavy vehicle interaction. Washington, D.C., Transportation Research Board. Garber, N. J., & Hoel, L. A. (2008). Traffic and highway engineering. London, Cengage Learning. National Research Council (U.S.). (2002). The National Highway Traffic Safety Administrations rating system for rollover resistance: an assessment. Washington, D.C., Transportation Research Board. Ioannou, P. A. (1997). Automated highway systems. New York [u.a.], Plenum Press. National Research Council (É.-U.). (2000). Accident mitigation guide for congested rural two- lane highways. Washington, D.C., National Academy Press. Shinar, D. (2007). Traffic safety and human behavior. Amsterdam, Elsevier. Mcgee, H. W., Hughes, W. E., & Daily, K. (1995). Effect of highway standards on safety. Washington, D.C., National Academy Press. Garber, N. J., & Hoel, L. A. (2008). Traffic and highway engineering. London, Cengage Learning Dowling, R. (1997). Planning techniques to estimate speeds and service volumes for planning applications. Washington, D.C. : Washington, D.C., National Research Council, Transportation Research Board, National Academy Press. Elefteriadou, L. (2014). An introduction to traffic flow theory. http://dx.doi.org/10.1007/978-1- 4614- 8435-6. National Research Council (É.-U.), National Cooperative Highway Research Program, & États- Unis. (2002). A procedure for assessing and planning nighttime highway construction and maintenance. Washington, D.C., National Academy Press. Stopher, P. R., & Stanley, J. (2014). Introduction to transport policy: a public policy view. International Conference On Future Generation Communication And Networking, & Kim, T.-H. (2011). Communication and networking. Part II, Part II. Berlin, Springer. Guihaire, V., and Hao, J-K. (2008). “Transit network design and scheduling: A global review.” Transp. Res. Part A: Policy and Practice, 42(10), 1251–1273. GUDP (2006). Interim Policy Advice 11. Levels of Car Parking in New developments. Gateshead UDP: Re-Deposit Draft Replacement Plan. IHT (1999). Guidelines for Planning for Public Transports in Developments. The Institution of Highways and Transportation, London. LTP3 (2011). Keep Tyne & Wear Moving, LTP3: The Third Local Transport Plan for Tyne & Wear, Strategy 2011 – 2021. March 2011. Kepaptsoglou, K., and Karlaftis, M. (2009). “Transit Route Network Design Problem: Review.” J. Transp. Eng., 135(8), 491–505. Lyons, G., & Harman, R. (2002). The UK PT Industry and Provision of Multi-Modal Traveller Information. International Journal of Transport Management, 12 (4), pp, 353-359. Naess, P (2005). Residential location affects travel behaviour – but how and why? The case of Copenhagen Metropolitan Area. Progress in Planning, 63 (2), pp, 167-257. NCC (2010). Transport Assessments, Travel Plans, and Parking. Interim Guidance for Newcastle upon Tyne. Newcastle City Council, April 2010. NTC (2010). Transport & Highways, Supplementary Planning Document Local Development Document LDD12. North Tyneside Council, March 2010. Romilly, P. (1999). Substitution of bus for car travel in urban Britain: an economic evaluation of bus and car exhaust emission and other costs. Transportation Research Part D, 4 (2), pp, 109-125. SCC (2008). Residential Design Guide. Local Development Framework, Supplementary Planning Document. Sunderland City Council, October 2008. STC (2008). South Tyneside Local Development Framework. SPD5 Planning Obligations & Agreements. South Tyneside Council, October 2008. Trics (2011). Good Practice Guide 2011. Managed by JMP Consultants Ltd on behalf of the TRICS Consortium 2011. Trl (2004). The Demand for PT: a practical guide, TRL Report TRL 593, 2004. Tyne & Wear (2006), Tyne and Wear Household Travel Survey Report 2006. Tyne & Wear (2011). The Validation of Planning Applications in Tyne & Wear 2011. The Critical Thinking Community. (2011). Defining critical thinking. Retrieved February 14, 2015 from http://www.criticalthinking.org/pages/defining-critical thinking/766 O’Connell, J., & Williams, G. (2011). Air transport in the 21st century: Key strategic Developments. Surrey, England: Ashgate Publishing. United States Government Accountability Office. (2009). Next generation air transportation system: Status of transformation and issues associated with midterm implementation of capabilities (GAO Publication No. GAO-09-479T). Washington, DC: U.S. Government Printing Office. United States Government Accountability Office. (2010). NextGen air transportation system: FAA’s metrics can be used to report on the status of individual programs, but not the overall NextGen implementation or outcomes (GAO Publication No. GAO-10-629). Washington, DC: U.S. Government Printing Office. White, P. (2002). PT: Its Planning, Management and Operation, 4th Edition. Spon Press, London and New York. Agrawal, A., M, Schlossberg and M, Irvin (2008). How far, by which route and why? A spatial analysis of pedestrian preference, Journal of Urban Design, 13 (1), pp, 81-98. Bannister, D. (2007). Transport and Reduced Energy Consumption: What Role can Urban Planning Play? Transport Studies Unit, Oxford University. Beirao, G. & Cabral, J. (2007). Understanding attitudes towards PT and private car: A qualitative study. Transport Policy 14 (6), pp, 478-489. Bensley, D. (1998). Critical thinking in psychology: A unified skills approach. Brooks/Cole Publishing: Pacific Grave, CA. Biba, S., Curtin, K.M., & Manca, G. (2010). A new method for determining the population with walking access to transit. International Journal of Geography Information Science, 24 (3), pp, 347-364. Burke, M, & Brown, A. (2007). Distances people walk for PT, Road and Transport Research 16 (3), pp, 16-29. Ceder, A., & Wilson, N. H. M. (2006). “Bus network design.” Transp. Res., Part B: Methodol., 20B(4), 331–344. Daniels, R. & Mulley, C. (2011). Explaining walking distance to PT: the dominance of PT supply. World Symposium on Transport and Land Use Research. Whistler Canada, pp 28-30. DfT (2007). Guidance on Transport Assessment. Department for Transport, Communities and Local Government, The Stationary Office, London. Dill, J. (2003). Transit use and proximity to rail: results from large employment sites in the San Francisco, California Bay Area, Transportation Research Board, 1835, pp, 19-24. Embry-Riddle Aeronautical University. (n.d.). Department of aeronautics: Undergraduate Capstone policy guide. Retrieved February 14 2015 from Ewing, R. & Cervero, R. (2010). Travel and the built environment: a meta-analysis, Journal of the American Planning Association, 76 (3), pp, 265-294. Fan, W., and Machemehl, R. (2004). “Optimal transit route network design problem: Algorithms, implementations, and numerical results.” Rep. SWUTC/04/167244-1, Center for Transportation Research, Univ. of Texas at Austin, Tex. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Speed management proposal Essay Example | Topics and Well Written Essays - 2250 words”, n.d.)
Speed management proposal Essay Example | Topics and Well Written Essays - 2250 words. Retrieved from https://studentshare.org/miscellaneous/1677915-speed-management-proposal
(Speed Management Proposal Essay Example | Topics and Well Written Essays - 2250 Words)
Speed Management Proposal Essay Example | Topics and Well Written Essays - 2250 Words. https://studentshare.org/miscellaneous/1677915-speed-management-proposal.
“Speed Management Proposal Essay Example | Topics and Well Written Essays - 2250 Words”, n.d. https://studentshare.org/miscellaneous/1677915-speed-management-proposal.
  • Cited: 0 times

CHECK THESE SAMPLES OF Speed management proposal

The elimination of IT crimes by knowledge management approaches

The Elimination of IT Crimes by Knowledge management Approaches Background Criminal groups across the globe are benefitted from modern technology as the integration of various communication channels enables them to maintain strong relationships between each other.... The Elimination of IT Crimes by Knowledge management Approaches Background Criminal groups across the globe are benefitted from modern technology asthe integration of various communication channels enables them to maintain strong relationships between each other....
3 Pages (750 words) Thesis Proposal

Fuzzy Logic with Data Mining with respect to Prediction and Clustering

This paper ''Fuzzy Logic with Data Mining with respect to Prediction and Clustering'' tells that the incorporation of fuzzy logic algorithms in data mining is a powerful tool that can be employed in the extraction, clustering, quantification and analysis of the data base information regarding the assessment and diagnosis of cancer risks....
8 Pages (2000 words) Research Proposal

Electronic Business and Commerce Components

om is an e-commerce website, and hence Information Science will play a critical role in the success of the project as compared to a traditional business where IS/IT is more of an enabler rather being a key component. Being a technology enabled company; we will… Achieving this goal will require high speed internet connectivity from an ISP, required number of PCs/Laptops, networking components like wireless routers and office accessories like Specifications for all these components are standardized and are available off the shelf in any computer store or an e-commerce website....
5 Pages (1250 words) Thesis Proposal

Physical therapy/ implementing ESCAPE for knee OA patients in Middle East

As people in the Middle East… Some core recommendations for OA management are self-management advice, patient education, and exercise, specifically because they bring short-term benefits related to psychosocial functioning, Physical Therapy/ Implementing Escape for Knee OA Patients in Middle East PHYSICAL THERAPY/ IMPLEMENTING ESCAPE FOR KNEE OA PATIENTS IN MIDDLE EASTOne of the cardinal symptoms of OA is chronic joint pain, which is a main cause of dependency, suffering, disability, healthcare expenditure, reduced quality of life, and psychosocial co-morbidities like depression and anxiety (Jacobson, 2012: p35)....
2 Pages (500 words) Research Proposal

The Effects of Outsourcing the IT Services for Private and Public Institutions

This research proposal "The Effects of Outsourcing the It Services for Private and Public Institutions" is designed to evaluate the current business activities and HR strategy and identify the non-core activities that could be efficiently and effectively managed virtually through outsourcing.... Access to information is a vital part of organizational management processes as it not only promotes efficiency and knowledge-based discharge of duties by the employees but it a great tool for the management to exploit the available information to improve its performance....
7 Pages (1750 words) Research Proposal

Factors of Productivity

Various factors influencing the productivity of individuals in the context of work can be a success, job satisfaction, desire for money, teamwork and recognition (management Study Guide, 2011).... The progress of any organization depends upon the speed of work.... Workers' motivation plays a decisive role in boosting the speed of work because they work at the grass-root level....
7 Pages (1750 words) Research Proposal

The Most Important Element in the Profitability of Pizza Hut

This paper 'The Most Important Element in the Profitability of Pizza Hut" focuses on the fact that the ultimate needs and aims of our business marketing strategy are to increase the volume of the business thus resulting in the expenditure of our food market.... hellip; The total number of the employees and the personnel that are involved in this study will include all the persons that are actually directly or, either, indirectly involved in the study for the development of the marketing strategy....
7 Pages (1750 words) Research Proposal

Windmill Energy in Natchitoches

To enhance their activity, generators are usually joined to the rotors by gears that multiply the speed of the generator.... The paper "Windmill Energy in Natchitoches" describes that the recent rise in the prices of fossil fuels and nuclear energy alongside global warming that is responsible for the increase in atmospheric temperatures has led to rising in demands for cleaner and cheaper energy sources....
11 Pages (2750 words) Research Proposal
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us